Products

Genezap Aerosol Nucleic Acid Cleaner

Packing Specification：

Product Introduction：

Genezap Aerosol Nucleic Acid Cleaner is a new type of strong oxidant complex. It can instantly oxidize and decompose airborne aerosol nucleic acids (DNA/RNA) and most small organic molecules upon contact. It is environmentally friendly with no residue and non-corrosive to equipment, color steel plates, and walls.

Through an aerosol nucleic acid contamination removal instrument, the reagent can be broken into small droplets with a diameter of approximately 5 μm, sprayed and diffused into the air to perform Brownian motion. The droplets will not settle or aggregate, have a long suspension time, and will rebound instead of breaking and wetting when contacting object surfaces. This allows the reagent to diffuse and penetrate every corner of the space, ensuring full contact and thorough reaction, completely eliminating airborne nucleic acid aerosol contamination and avoiding PCR false positives.

Intended Use：

Completely degrades liquid and surface DNA/RNA within 5 minutes.

Kills SARS-CoV-2 (COVID-19 virus) and ASFV (African Swine Fever Virus) within 15 minutes.Degradation is residue-free, causing no corrosion to instruments and equipment, and no inhibition of subsequent enzymatic reactions.Can be used for nucleic acid degradation and sterilization (for liquids and surfaces) on the surfaces of instruments and equipment.

Precautions：

This reagent has a certain irritating effect on respiratory mucosa. When treating air, wear protective glasses, masks, caps, clothes, and gloves.

1. This product is for laboratory research use only. It is prohibited for use in medicine, clinical treatment, food, cosmetics, and other purposes.

2. Skin and eye contact: Rinse with clean water immediately; contact lenses can be removed and rinsed with clean water.

3. Inhalation: If feeling unwell, consult a doctor.

Usage Instructions

Add the Genezap Aerosol Nucleic Acid Cleaner to an aerosol nucleic acid contamination removal instrument, set the parameters, and spray until the space is filled with the aerosol.Maintain the aerosol for approximately 45-60 minutes (not less than 30 minutes), then ventilate to disperse the mist. The removal rate is approximately 98.5%.Unused reagent can be recovered. Run the aerosol nucleic acid contamination removal instrument for 2 hours to recover aerosols, eliminating residual mist and tiny particles in the air.