Products

Surface RNase Remover(RNaseAway)

Packing Specification：

Product Introduction：
RNaseAway is mainly used to remove RNases from the surface of experimental equipment. It contains several RNase-inhibiting components and can effectively eliminate RNase contamination on surfaces such as laboratory workbenches, glassware, and plasticware.

Usage Methods：
1.Laboratory Workbenches
Spray RNaseAway directly onto the workbench surface and wipe evenly with a paper towel.After 10 minutes, wipe off the surface RNaseAway with a clean paper towel.Rinse thoroughly with autoclaved water, then dry with a new clean paper towel.

2.Experimental Equipment
Carefully pour RNaseAway onto a paper towel.Wipe the surface of the experimental equipment with the RNaseAway-moistened paper towel (small equipment parts can be briefly soaked in RNaseAway).After 10 minutes, wipe off the surface RNaseAway with a clean paper towel.Rinse thoroughly with autoclaved water, then air-dry naturally or dry with a new clean paper towel.

3.Plastic and Glass Containers
Add a sufficient amount of RNaseAway to the container to ensure all inner surfaces are fully in contact with the reagent (tilt, invert, or rotate the container to assist coverage; for centrifuge tubes, vortex for 1 minute).After 10 minutes, discard the RNaseAway.Rinse thoroughly with autoclaved water/DEPC-treated water and air-dry (avoid rinsing with RNase-contaminated water or introducing secondary contamination due to improper operation).